New Arrivals

For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the w...

Fuel surge tank compatible with Ti Automotive E5LM brushless fuel pumps (BKS1000). Can hold one or two pumps. Fuel pumps sold separately and must b...

CNC Machined laser engraved. For use with Mazda Rotary engines. See website for details.

Mounting bracket and hardware for installing a Radium Engineering fuel filter on the rear subframe of the FD RX-7. Filter sold separately.

Radium Engineering Nissan VQ FPD Adapter (8AN ORB / 27mm Bore)

Stainless steel construction with special float that works in all popular vehicle fuels including E85. Switch activates when float changes position.

Bolt-in catch can kit for the 2015-2020 Ford F150 and F150 Raptor with Ecoboost V6 engines. Interfaces with the PCV hose to filter contaminants out...

INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM

INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM

Radium Engineering 12AN Female Fitting to Air Filter

CNC machined fuel rail for the 4-cylinder Mazda MZR engine. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing and ...

This optional kit compliments the Radium MZR fuel rail by allowing the stock fuel connection to be used.

Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.

Injector seats for the Toyota 2JZ-GE intake manifolds equipped with air-assist eimissions equipment. Allows the use of aftermarket fuel injectors.

A combination of Radium part number 20-0461 and 20-0508 in one kit. Level switch and diagnostic LED indicator. For use with Radium products that ar...

Dual catch can kit for the Nissan 370Z (all years, all trim levels). Easy bolt-in installation and integrates with factory components.

Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.

Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not compat...

CNC machined aluminum universal PCV valve. 10AN ORB male threads. Compatible with Radium catch cans and other Radium PCV accessories.

Billet aluminum fuel rail for the DSM 4G63 engine. Features high-flow 8AN ports and is safe for use with E85. Direct bolt-on installation.

Fuel line plumbing kit for use with Radium fuel rail. Includes fittings, hose and adpaters for an easy bolt-in installation of the Radium 20-0533 ...

Universal in-line check valve. Female 8AN ORB inlet, male 10AN flare outlet. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Features roll-over protection and discriminator functionality. For use with Radium FCST and Radium quick-fill systems.

A bolt-on fuel rail for the Nissan RB25 NEO engine. Features 8AN ORB ports. Adapter fittings sold separately. Visit www.radiumauto.com for more det...

Replaces factory oil cap on many GM LS engines. Check www.radiumauto.com for compatibility information. Plug can be removed and accessories can be ...

For use with the Radium Engineering fuel rails for the GM LS9/LSA engines. Allows hook up of factory fuel lines to the fuel rails.

CNC machined aluminum fuel rail for the S13 SR20DET. Features 8AN ports. This fuel rail converts to top feed injectors. See product page at www.rad...

This CNC machined aluminum PCV valve can install to a 10AN ORB female port and allows connection of a 6AN hose. The valve contains all the same fun...

Single oil catch can kit for the Cadillac CTS-V (LSA engine). Interfaces with crankcase vent line to filter oil out of the blow-by gasses and keep ...

Single catch can kit for the Nissan R35 GT-R. Interfaces with the PCV valve line. Easy bolt-in installation.

FUEL RAILS, SUBARU TOP FEED CONVERSION, V1-6, NO FITTINGS

In-tank fuel pump hanger for the 2010+ Nissan R35 GT-R. Compatible with a variety of aftermarket fuel pumps. See website for more details.

Fuel rails for the 4-cylinder Subaru Engines, V1-V2 generation. Converts to top feed injectors. 8AN ORB ports.

Fuel filter kit that replaces the OEM fuel filter. Mounts in the same location under the hood. Filter element is stainless steel mesh and is servic...

Fuel filter kit that replaces the OEM fuel filter. Mounts in the same location under the hood. Filter element is 6 micron microglass and is not ser...

CNC machined aluminum brace for the brake master cylinder on RHD Nissan R32 GT-R. This brace prevents flex in the firewall and improves brake pedal...

This kit creates a high-flow engine vent port using the billet oil fill cap and includes hose and a billet aluminum PCV valve to connect to the int...

This cap replaces the factory oil filler cap found on many GM engines including the LS V8. It features a center port that is used as a crankcase ve...

This device allows implementing an ethanol content sensor into a high flow fuel line. The design has dual passages that the fuel can flow through, ...

Dual catch can kit for the Nissan R32 GTR. Interfaces with both the crankcase vent line and PCV line. Includes all parts for easy bolt-in installat...

Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Alumin...

Allows use of early model 35z/G35 fuel level floats on the Radium in-tank FHST system. CNC machined aluminum.

Flexible fuel filler hose. 3 foot long, 1.5" inside diameter. T-bolt clamps included.

This adapter is designed to be convert the outlet of a Ti Automotive E5LM pump to 6AN male. Has integrated check valve. Will possibly work for othe...

Installs on select submersible fuel pumps and converts to 6AN male.