Radium Engineering

360 degree swiveling fitting. Stainless steel and anodized aluminum construction. Suitable for all fluids. Rated for use up to 150 psi.

This low profile swiveling fitting screws into a 6AN ORB port and has a hose barb at 90 degree angle. Safe for use with all types of fluid. Constru...

Stainless steel and aluminum construction. Screws into a 6AN ORB female port and provides a hose barb connection that swivels 360 degrees. Suitable...

This fitting screws into any female 6AN ORB port and provides a 360 degree swiveling 3/8 SAE quick connect male. This low profile fitting is safe ...

This 90 degree swivel fitting screws into a 6AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all fuels and oils.

360 degree swiveling fitting. Screws into a 6AN ORB port and features a 10mm hose barb.

Radium Engineering 6AN ORB Swivel Banjo to 8AN Male

Swiveling fitting that will screw into a 6AN ORB port and provides a 6AN ORB female to use. Stainless steel and aluminum construction.

This low profile swiveling fitting screws into a 6AN ORB port where an 8.5mm hose can attach to the fitting. Has swivel 6AN male. Safe for use wit...

This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Construc...

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.

High flow feed kit from fuel tank to engine bay using PTFE hoses and Radium in-line fuel filter. Hoses pre-made to length and special filter mounti...

Fuel cell vent valve will roll-over protection. 12AN Male hose connection.

Fuel cell vent valve with roll-over protection. Screws into a 12AN ORB female port.

Mounting bracket for Radium Engineering fuel filters. Designed specifically for the FR-S/BRZ/GT86/GR86 (all years). Locates filter under the car n...

Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the p...

PTFE submersible fuel tubing. 3/8" inside diameter, 8.2" overall length.

PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.

Anodized aluminum. For use with OEM hose connection. Converts to 10AN male.

Single clamp with two positions. Anodized aluminum.

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting fo...

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...

Submersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.

Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 17.7in Long

Brackets for holding aftermarket high-flow fuel lines to underside of the GR Supra. Uses all factory mounting locations.

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.

High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fue...

Molded 6 gallon dump can. Compatible with all types of fuel. Includes standard fill spout and accessories. Semi-transparent white color.

Replacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).

Set of brackets to retain fuel lines and brake lines on underside of Nissan vehicles including S13, S14, R32, R33, R34 and more. Billet aluminum, w...

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

Clear fuel filler hose. 36" length. 1.5" ID. Clamps included.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Flexible fuel filler hose. 3 foot long, 1.5" inside diameter. T-bolt clamps included.

Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Alumin...

This CNC machined aluminum PCV valve can install to a 10AN ORB female port and allows connection of a 6AN hose. The valve contains all the same fun...

Features roll-over protection and discriminator functionality. For use with Radium FCST and Radium quick-fill systems.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.