aFe

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system fe...

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coil...

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air fil...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter ...

A simple 10 minute install will give you an increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness wit...

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and ...

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This sy...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter ...

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for im...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit in...

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air fi...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air filter...

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air fi...

Vulcan Series 2-1/2 IN to 3 IN Stainless Steel Cat-Back Exhaust System Black Toyota Tundra 22-26 V6-3.4L (tt) Constructed from 2-1/2 IN - 3 IN Mand...

This aFe CONTROL Rear Leveling Kit is made from 304 stainless steel and provides a 1.625-Inch lift in the rear to provide better off-road performan...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system fe...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge...

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This sy...

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This sy...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system fe...

This BladeRunner Oil Cooler uses a durable brazed 25-row all-aluminum stacked plate construction that allows for greater efficiency and lower press...

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and ...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit in...

Constructed from rugged 3/16” and 1/4” steel plate and Ø2”x .059” steel tubing, Terra Guard’s bull bar is built to withstand the toughest condition...

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This sy...

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 1.5-Inch lift in the front to provide better off-road performance while al...

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter ...

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness...

Filter Flange Retention Design: The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter...

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system fe...

Enhance your Tundra’s handling performance and style with the all-new aFe CONTROL Upper Control Arms. Although the factory control arms may be adeq...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.875-Inch lift in the front to provide better off-road performance whil...

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while al...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front to provide better off-road performance while ...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.5-Inch lift in the front and a 1-Inch lift in the rear to provide bett...

Dramatically reduce body roll without sacrificing ride quality with the aFe CONTROL Tundra rear sway bar. Our 3-way adjustable sway bar will allow ...

Dramatically reduce body roll without sacrificing ride quality with the aFe CONTROL rear sway bar. Our 3-way adjustable sway bar will allow you to ...

Add dedicated front recovery points to your Toyota Tundra. aFe POWER Tow Loops mount directly to the frame and are much safer than the factory tie-...

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constr...

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe POWER Mach Force Xp exhaust system. Constructe...

aFe POWER Mach Force-XP series cat-back exhaust system for the Toyota 4Runner with the V6-4.0L engine provides speed and style. Designed from 2-1/2...

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out ...

aFe power introduces the MACH Force-Xp cat-back exhaust system for your Toyota Tacoma. This cat-back exhaust is constructed out of 2-1/2 IN 100% MI...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 hors...

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 hors...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 sta...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 sta...